Wednesday, May 26, 2010

Gripping Beast Plastic Vikings




The words "Gripping Beast plastic Vikings" were, for me, the wargaming equivalent of the words "Scarlett Johansson and Penelope Cruz in lesbian love scene" for the cinema. Gripping Beast Vikings were the first 28mm metal figures I ever bought. They were also the first metal 28mm figures I actually had a game with. So they were, therfore, the one "must buy" from Salute. Sadly, like the aformentioned Johansson/Cruz scene, they have proved to be something of a disappointment. I have built several and painted one and have the following thoughts.


Four sprues of ten figures each


The standard sprue

Firstly, what do you get in the box? Four identical sprues with each. Each sprue also contains:
10 bodies all in chainmail (five different types; 2 of which have left arms attached)
10 shields (plus one with attached spears)
6 swords in scabbards
2 double handed axes
2 single handed axes
6 scram knives
4 pouches with attached scrams
14 helmeted heads (10 different)
4 right arms holding a sword
2 right arms holding single handed axes
5 right arms with spears
4 hands holding swords
4 hands holding single handed axes
2 arms designed to hold a double handed axe
5 left arms


Detail of the main sprue


This sound like a good varied selection but I have a few issues:

I would have liked a few more left arms: as four have them attached to the figures and you get only five more then it means that one of your figures per sprue has to be a double handed axeman.

Only five spears per ten figures and no separate spears. Vikings fought primarily with spears in a shieldwall; I find that two many swords and axes make it more a sort of Warhammer look.

There are no swords which either aren't in scabbards or have hands attached. The idea is that you cut a hand off an arm holding an axe and replace it with ahand holding a sword (and vice versa). I have done this and it works OK but you have to make sure you cut at exactly 90 degrees
.

Command sprue (x2)


Next there are two identical command sprues these contain:

2 bodies in chainmail (the same as two of the figures on the main sprue)
2 heads. these are different from the main sprue: one in ahelmet, one bareheaded.
2 shields.
1 right arm holding a horn.
1 left arm holding a sword.
1 right arm holding a sword.
2 swords in scabbards.
One cloak with an animal skin on it.

My issues with this are:
It's a shame that they couldn't have done some new bodies.
There are only two left arms and one is holding a sword so you can't have your hornist holding a shield as there aren't enough left arms.

Overall I would have liked to see: more variation in bodies, more bare-head options, more spears and more left arms. So, the set is not as flexible as it could have been.

Also included is a brief set of instructions (mainly concerned with the assembling of the two handed axemen and some (rather small) paper flags.


First painted plastic. Its is quite tricky to dry brush the rather shallow plastic chainmail detail


The figures go together quite well, although gaps between the arms and torsos can't be filled because of the pattern of the chainmail. I did find on some arms that I had to trim off some of the arm to get it to fit properly. There is only one real assembly problem and that is to do with the scabbards. Most of the sleeves come down so low that there is no room to fit a scabbard (especially if it includes the sword's grip). A number of the figures are depicted with over the chest belts from which swords would have hung but getting them in place is a real problem; you have to make them stick out at odd angles.


One of the few arm/body combinations that permit the scabbard to hang correctly


If the sword hilt is attached you have to angle the scabbard like this


Couldn't get a scabbard in at all on this one as the sleeve comes down too low


L to R: old Gripping Beast metal, New Gripping Beast plastic, Artizan Designs and Foundry


Size wise, they are smaller than many of my old Gripping Beast figures but are similar to the Artizan and Foundry ones which make up the bulk of my army. Certainly you could mix them in with no problem. Two things I don't like: the spears are very fat (compared with, for example, the Immortal Miniatures plastic Greeks spears) and are fatter than the Gripping Beast cast spears I have used on my other Vikings. Secondly, they definitely have a slight case of big head syndrome (some more than others) which is a shame as most plastics are edging towards more normal proportions (Perry, Immortal). In short they are rather more cartoon -ike than I would have expected from the Gripping Beast of old. To be fair I need to get some more painted up and see what they look like en masse but I would give the whole box a slightly disappointing 6/10.

2 comments:

Giles said...

Excellent review, LH. I recall the Perries saying a while ago that chainmail is very difficult to do convincingly in plastic. My own views, based on the plastics I've seen to date, is that the most successful sets are those where there aren't big variations in the poses and the poses are more static (like the Perry Napoloenic infantry). It's when you have "dynamic" poses that you encounter the "zombie" problem, i.e. arms sticking out at weird angles and figures that look quite stiff and unnatural (I'm mainly thinking of Wargames Factory but even the Perries aren't immune - I think the new plastic French Nap foot dragoons look a bit odd).

Giles

Braxen said...

thanks for the review, it was very useful, and I appreciate the analogy to the movie scene :-)